# SOFIA 565 Changelog

NOTE, when updating between versions where any digit but the last has changed:
- New settings have been added
- The update will set reset the unit to Factory Default settings, except for IP settings
- Previous settings will automatically be recalled after Factory Defaults are loaded
- This will take ~30 seconds after the unit has been updated, and it will reboot after
- Any new settings that didn't exist in the previous firmware will be at Factory Defaults

How to update firmware:
- Access the Admin webpage
- Click "Select Firmware File..."
- Select the firmware (.bin file)
- Click "Update Firmware"
- Wait for update to complete

## [1.2.1.1] - 2023-9-6
### Added
- NTP server sync status is now shown on the Time webpage

## [1.2.0.4] - 2022-5-24
### Fixed
- If updating to >1.2.0.1 from <1.2.0.0, the Hardware Profile restore -> reboot process would occur while
  the Dante firmware is updating, causing the update to fail

## [1.2.0.3] - 2022-5-13
### Fixed
- Typo on Dante webpage (HTTP Port -> Port)

## [1.2.0.2] - 2022-5-10
### Added
- Automatically update Dante firmware when newer is available (this firmware will update Dante to v4.2.5.1)
- AES67 TX RTP multicast flow can be created via the Dante webpage
- Preset dropdown selector added to webpage header next to "listen" icon
- Added placeholder text for empty SMTP fields on Email webpage to hopefully make these settings more clear

## [1.2.0.1] - 2021-12-14
### Added
- Responds to SNMP MIB2 system queries
- Alarm status LEDs on webpages: alarms that are not enabled appear greyed out.
  This makes it easy to see not only when an alarm is active/on, but if it is even enabled.

### Fixed
- Time and date format settings were not showing correctly on the front panel GUI

## [1.2.0.0] - 2021-09-02
### Added
- UDP stream output can now be set as either "Raw" (same as previous versions) or MPEG-TS

## [1.1.2.1] - 2021-08-25
### Fixed
- RTC battery was draining while the unit is on. This resulted in prematurely dead batteries, that will likely need replacing.

## [1.1.2.0] - 2021-05-14
### Fixed
- Couldn't send emails where User wasn't email address formatted (like something@something.something)
- Read-only user and StationRotation icons in webpage header weren't aligned properly

### Added
- RDS webpage links to NRSC translator list if PI is D*** and RDS mode is RBDS/NA

## [1.1.1.0] - 2020-06-02
### Fixed
- Email notification settings were being stored/recalled per preset (they are supposed to be global)

## [1.1.0.3] - 2020-05-14
### Added
- STARTTLS support for SMTP. This allows for office365/exchange SMTP servers to work, as they do not support implicit TLS.

### Fixed
- Emails sent to Sprint email-to-text addresses not working

## [1.1.0.1] - 2020-03-31
### Fixed
- Bug preventing emails from being sent

## [1.1.0.0] - 2020-02-28
### Added
- UDP stream output
- User (read only) web login
- Updated manual to include these features

### Fixed
- Fix mute status (due to mute on low signal) of preset not recalling correctly during StationRotation if muted on a previous rotation
- Fix tuning on Now Playing webpage not working down to 64MHz
- Fix issues with not receiving all RDS groups & incorrect BLER
